|
ELECTRICAL DESIGNERS & ENGINEERS
Electronics Engineer (space hardware)
space hardware
|
Job Reference:
C-GJ-SPHW
(Please use reference when applying for this job)
|
Location: Wilmington, MA
|
Our client in Wilmington, MA has an urgent
new contract need for an Electronics
Engineer with a minimum of two years
experience in harness wiring, cabling and
connector development, specifically for
space flight hardware. All applicants MUST
have space flight hardware experience--this
is main sticking point for our client.
Schematic capture and cable layout
experience preferred (Inventor Professional-
-cable and layout toolbox). BSEE preferred.
All applicants MUST be US Citizens in order
to be considered for this position. All
work on-site. Contract expected to last 3-6
months.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 3-6 mo.
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC09/25/03999SPHW
Electrical Designers (Cable Design)
cables, harnesses
|
Job Reference:
C-GJ-CDES
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
One of our top clients in Lexington, MA has
two new long-term contract openings for
Electrical Designers--one is for a senior-
level designer with ten-plus years of
experience as a cable designer--the other
opening is for a junior-level designer with
0-5 years of experience. All applicants
MUST be US Citizens and be eligible to
receive Secret Security Clearances. All
work is on-site
RESPONSIBILITIES
- Produce full documentation of various
system interconnect (cable and harness)
designs based on rough sketches and/or
verbal instructions from staff.
- Develop logic diagrams, schematics,
design layouts, and basic calculations to
support design concepts.
- Produce finished manufacturing
documentation consisting of block diagrams,
schematics, cable drawings (including
connector selection), and wire diagrams
(including wire types/sizes and wire run
lists).
- Prepare engineering release and change
documentation, as well as assist
responsible engineer in producing
fabrication orders.
- Support the entire fabrication and
assembly process, as required.
REQUIREMENTS:
-Must have extensive (working knowledge for
Junior Designer) knowledge of
cables/harnesses, electro-mechanical
packaging, electrical manufacturing and
assembly methods, 3D & 2D CAD (Computer
Aided Design) software, PDM (Product Data
Management) software, drafting practices,
and ASME and IEEE standards.
-A minimum of ten (10) years experience as
a cable designer, including a minimum of
six (6) years experience on CAD, PDM, and
schematic capture software.
(for Junior Designer job, 0-5 years of
experience is fine)
-Experience on PTC/CoCreate OneSpace
Drafting and Model Manager preferred but
not required.
-Familiarity with ASME/IEEE standards and
established practices in aircraft, missile,
spacecraft and ground support equipment.
-Should be capable of developing own
concepts, design layouts, and basic
calculations to support design concepts.
Must have good communication skills,
require little or no supervision, and
possess good creative skills.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 1 yr+
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC09/03/25999CDES
FPGA Engineer
FPGA
|
Job Reference:
C-GJ-FPGADT
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
Our leading client in Lexington, MA has an
immediate, long-term and on-site opening
for an FPGA Engineer. All applicants MUST
be US Citizens and be eligible to receive
Secret Security Clearances. This contract
has very long-term potential, and
applicants should keep in mind that work
must be performed on-site in Lexington, MA
and that we do not offer per diem
arrangements.
Responsibilities
-Work as part of the FPGA Design Team to
design high performance processors as well
as high-speed communications modules within
these processors.
-The FPGA Engineer will also be involved in
design simulation and testing.
Requirements/Skills Background
FPGA Engineer should have experience with
the following:
-FPGA design, VHDL and Verilog-based
compilation designs, RTL level design,
High-speed designs, 3rd party IPs usages
(FIFO, SRAM, and register file generators)
as well as testability and test vector R
generation; Engineer should also have
experience with SDRAM interface controller,
micro-controller, microprocessors, high-
speed communications links, and routing &
timing optimization.
-Familiarity, experience and comfort with
working in small and large design teams.
-MSEE or PhD in Electrical Engineering with
at least 5 years of directly applicable
work experience preferable.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: long-term
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC09/02/10999FPGADT
PCB CAD Librarian
Expedition
|
Job Reference:
C-GJ-LIBEXP
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
One of our best clients in Lexington, MA
has an immediate long-term, on-site
contract need for a Printed Circuit Board
(PCB) CAD Librarian to help manage the
deployment and support of the Mentor
Graphics Dx/Expedition PCB CAD tools.
Applicant MUST be US Citizen and be
eligible to receive Secret Security
Clearance.
RESPONSIBILITIES:
-Create schematic symbol and footprint
geometries for component Library database.
-Maintain part number to symbol/footprint
relationships in Oracle DxDatabook database.
-Verifiy pin-outs and package geometry on
new library components.
-Evaluate new tool releases with subsequent
configuration, rollout and support of
networked PCB design flow.
-Create and deliver in-house training
classes in this design flow.
-Provide one-on-one technical support to
more than 60 internal users.
-Write and publish Tool FAQs, Technical
Application Notes, and Welcome pages on-
line.
REQUIREMENTS:
-BSEE/BSET or equivalent related
experience.
-Must have 6 years experience in EDA, with
at least 3 years in Mentor Graphics
DXDesigner/Expedition tools (ex: performing
CAD Admin / librarian functions or
schematic circuit design in this CAD design
flow). -Strong Linux/Unix experience.
-Experience with Oracle databases and/or
client/server applications a plus.
-EDA application engineer experience a
plus.
-CAD PCB design in a team environment with
excellent written and oral communication
skills.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 1 year+
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC09/02/02999LIBEXP
FPGA Digital Design Engineer
FPGA
|
Job Reference:
C-GJ-DIG
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
Our client in Lexington, MA has a long-term
contract opportunity for a FGPA Digital
Design Engineer to develop digital signal
processor FGPA firmware for use in wireless
communications. All work will be performed
on-site in Lexington.
EXPERIENCE/SKILLS:
-Must have experience with FPGA firmware
development process, including VHDL code
development, simulation, synthesis, timing
closure, and FPGA verification.
-Desired experience with wireless
communications systems, digital signal
processing, and/or communication theory.
-Proficiency in all aspects of FPGA design
-In-depth familiarity with Xilinx FPGAs
(particularly the Virtex family),
Synplicity, Xilinx ISE, and Modelsim.
-Ability to communicate and work with teams
and to troubleshoot designs while operating
within an integrated system
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 1 yr+
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC08/09/23500DIG
Electrical Designer, Facilities
|
Job Reference:
C-GJ-FACED
(Please use reference when applying for this job)
|
Location:
|
One of our top clients has an urgent long-
term contract need for an Electrical
Designer with strong facilities experience.
All work to be performed on-site in the
Bedford/Lexington area.
Responsibilities:
-Follow applicable codes and standards
while implementing electrical system
designs and preparing working drawings and
specifications under the supervision of an
engineer
-Select and size materials, fixtures and
equipment (including conduit and wire)
based upon performing necessary
calculations and other design criteria and
standards
-Make field investigation to determine the
nature of existing conditions, resolve
design and implementation issues, verify
satisfactory results, coordinate work with
other disciplines, perform start-up, etc.
-Prepare cost estimates based upon
conceptual designs, final designs and other
criteria -Prepare basic technical specification for
equipment/material procurement and
installation by a construction contractor
-Review shop drawings submittals for
compliance with the drawings and
specification and recommending
approval/disapproval by the engineer.
Qualifications:
-Must have experience with AutoCAD
computerized drafting
-Applicant should have an Associates Degree
in Electrical Engineering from a technical
school or equivalent experience
-Ten years or more experience in the design
and installation of in-plant facilities
associated with research laboratories,
clean rooms, computer rooms, and office
buildings is required.
-Should have experience working for a
consulting engineering or architectural
engineering firm or organization
-Knowledge and experience with computer
software applications (e.g. spreadsheets)
is highly desirable
-Applicant should be experienced with
medium and low voltage power systems,
lighting systems, preventative maintenance
procedures, fire detection, suppression
systems, security systems, and power
monitoring system.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration:
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC08/06/20999FACED
Electrical Designer
|
Job Reference:
C-GJ-ElecDes
(Please use reference when applying for this job)
|
Location:
|
SUMMARY
One of our longest standing clients has an
urgent new need for an Electrical Designer
with at least 10 years of experience in
general electro-mechanical packaging and
equipment design for high reliability or
ruggedized applications. The Electrical
Designer will design the electronics,
cabling and mechanical subsystems for a
robotic navigation and control payload that
will be deployed on a military vehicle.
This long-term contract opportunity is a
full-time, on-site position at our client
in the Bedford/Lexington area. Generous
flex time is available!
KNOWLEDGE/SKILLS REQUIREMENTS
-Candidate must be familiar with design
techniques for ruggedizing electronics
assemblies against shock, temperature and
moisture. -Experience with CAD packages such as
AutoCad or ProE is required.
-Familiarity with high reliability
electronic cabling and connector systems is
required.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 10+ years
|
Duration: 5+ months
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC08/04/07999ElecDes
Sr. Printed Circuit Board Designer
PCB, Mentor Graphics Expedition
|
Job Reference:
C-GJ-PCBDESGN
(Please use reference when applying for this job)
|
Location: MA
|
Our client is looking for a Printed Circuit
Board Designer for a year-long contract that
has potential to turn into a long-term role. Mentor Graphics Expedition
experience is
essential for this position.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 10 years
|
Duration: 1yr+
|
Pay Rate: Competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC08/01/23999PCBDESGN
Electronic Technician
Soldering, assembly, harness building, cabling, and PC board assembly
|
Job Reference:
C-GJ-ELECTECH
(Please use reference when applying for this job)
|
Location: Lexington MA
|
Immediate need for an Electronic Technician in an R&D environment to build prototypes and airborne equipment. This position requires excellent skills in soldering, assembly, harness building, cabling, and PC board assembly. Familiarity with military standards, NASA or IPC Certification is desirable.
You must be eligible to obtain a DOD security clearance.
This is an hourly position. Working hours are 8:00 - 4:30, but there is often overtime available so there are people at work there from 7 am to 7 pm.
If you think you may have already applied to this position in the past, please send an updated resume or email your availability.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 5+ Years
|
Duration: 6 Months with possible extensions
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC05/07/06500ELECTECH
Electrical Designer
|
Job Reference:
C-GJ-ELECDSN
(Please use reference when applying for this job)
|
Location: Lexington MA
|
We have several contract openings with long-term potential at our client site in Lexington, MA for Electrical Designers with CAD experience to work on DOD projects in a high-levelENGineering environment.
These are design positions, notENGineering positions.
You must be eligible to obtain a DOD security clearance.
If you think you may have already applied to this position in the past, please send an updated resume or email your availability.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 4 Years
|
Duration: 6 - 9 Months
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-EEC05/06/30500ELECDSN
Electrical Designers & Engineers
|
Job Reference:
C-GJ-EDE999
(Please use reference when applying for this job)
|
Location: MA, NH, RI
|
We have ongoing needs for
Electrical Designers & Engineers
with a minimum of
4-5
years of experience.
If you do not see an opportunity that fits your background, please contact us to discuss our other job openings and register for future needs.
Call 617-441-8777 Ext. 6 for details or
e-mail your resume now!
|
Experience Level: 4-5 Years
|
Duration: Varies
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
Electrical Designers & Engineers
|
Job Reference:
P-GJ-EDE999
(Please use reference when applying for this job)
|
Location: MA, NH, RI
|
Our clients frequently have openings for
Electrical Designers & Engineers
with a minimum of
4-5
years of experience.
If you do not see an opportunity that fits your background, please contact us to discuss our other job openings and register for future needs.
Call 617-441-8777 Ext. 6 for details or
e-mail your resume now!
|
Experience Level: 4-5 Years
|
Salary: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
|
