|
MECHANICAL DESIGNERS & ENGINEERS
Autodesk Inventor 2009 Mechanical Designer
|
Job Reference:
C-GJ-Inv
(Please use reference when applying for this job)
|
Location: North Shore
|
One of our clients on the North Shore has
an immediate contract opening for a
Mechanical Designer with experience using
Autodesk Inventor 2009.
Responsibilities/Requirements
-Will be responsible for developing new
designs. Create, update and check drawings
to ASME Y14.5 standards.
-Provide support to Manufacturing.
-Document electrical schematics and circuit
board assemblies.
-Initiate and process ECR's/ECO's. Specify
military grade hardware.
-Create Inventor library components.
-Expert experience with AutoDesk Inventor
2009.
-Must have experience using AutoDesk Vault
and the sheet metal utility within
Inventor.
-Experience designing for MIL-S-901D and
MIL-167-1A.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 6 months
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC09/06/06999Inv
Mechanical Designer
|
Job Reference:
C-GJ-RAIMEC
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
One of our best clients in Lexington, MA
has an immediate long-term, on-site
contract need for a Mechanical Designer.
Applicant must be a US citizen and be
eligible for a government Secret Security
Clearance.
Responsibilities:
-Design and develop mechanical units and
systems from rough sketches and/or verbal
instructions from engineering staff.
-Perform basic design calculations, prepare
design concepts, layouts, and finished
manufacturing drawings specifying
dimensional tolerances, surface finishes,
and materials.
Skills/Knowledge Requirements:
-Minimum ten years experience in design,
including a minimum of six years on CAD
(Computer Aided Design) systems.
-Must have extensive knowledge of
materials, manufacturing techniques,and
military standards.
-Must have broad experience and knowledge
with actuating mechanisms, precision
gearing, sheet metal alloy fabricating
design techniques(welding, dip brazing,
oven brazing, and soldering), heat
treatment processes, painting and plating
finishing processes.
-Requires little or no supervision and
performs assignments with creative ability,
resourcefulness, and originality.
-Familiarity with ASME standards and
established practices in aircraft, missile,
spacecraft and ground support equipment.
-Should be capable of developing own
concepts, design layouts, and basic
calculations to support design concepts.
Desirable Skills:
-Experience on Co-Create OneSpace Designer
helpful, but not necessary.
-Ability to do electro-mechanical design
work
-Ability to design opto-mechanical
components
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 1yr.+
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC08/10/16999RAIMEC
Mechanical Engineer
|
Job Reference:
C-GJ-Antan
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
SUMMARY:
Our client in Lexington, MA has an
immediate long-term contract need for a
Mechanical Engineer to provide mechanical
design and engineering support to a
multidisciplinary team and participate in
the development of mechanical systems from
conceptual design through environmental
testing. All applicants MUST be US Citizens
and be eligible to obtain a security
clearance. All work to be performed on-site
in Lexington, MA.
REQUIREMENTS:
-MS or PHD in Mechanical or Civil
Engineering (or relevant work experience)
with a minimum of 5 years work
experience
-Must have demonstrated a broad range of
design skills for antenna truss structures,
lifting mechanisms, and antenna drive
systems; also analytical skills including
static, dynamic, thermal-elastic and gear
analysis.
-Familiarity with large RF disk antenna
structures on elevation over azimuth
mounts; aluminum welding standards and OSHA
standards are a plus.
-Must have the ability to work well in a
team environment and to clearly describe
results in presentations and reports.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration:
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC08/10/09999Antan
Mechanical Engineer (Structural Analysis & Testing)
FEA, finite element analysis, ANSYS, NASTRAN,
|
Job Reference:
C-GJ-FEAENG
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
We have an urgent new long-term contract
need for a Mechanical Engineer to work on-
site in Lexington, MA. Applicant must be a
US Citizen and be eligible to receive
security clearance due to nature of
government work.
Duties include the following: mechanical
design, structural analysis and testing,
and supporting hardware development from
conceptual design through fabrication and
performance.
Knowledge/Skills Requirements:
-BS or MS in mechanical or aero engineering
with 5-10 years work experience
-Working knowledge of computational tools
such as NASTRAN or ANSYS
-Ability to use computer aided design tools
such as Solid Designer or SolidWorks
-Ability to clearly describe results in
oral presentations and written reports
-Previous experience working on space
programs desirable
-Ability to work in team environments
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 1yr+
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC08/10/01999FEAENG
Mechanical Designer, Facilities
|
Job Reference:
C-GJ-FACMCH
(Please use reference when applying for this job)
|
Location: Lexington/Bedford Area
|
One of our top clients has an
urgent long-term contract need for an
Mechanical Designer with strong facilities
experience. All work to be performed on-
site at our client in the Bedford/Lexington
area. Responsibilities:
-Implement basic designs developed by an
engineer, prepare CAD working drawings,
follow all applicable codes, select
mechanical materials, layout systems,
select equipment, layout ductwork and
piping, prepare specifications, perform
field investigations, coordinate work with
other disciplines, make necessary
calculations, review shop drawings, inspect
field installations, and prepare cost
estimates
Qualifications:
BR> -Ten (10) years or more experience in the
design and installation of in-plant
heating, ventilation and air conditioning
systems, plumbing and process piping
systems associated with research
laboratories, clean rooms and office
buildings is required.
-Applicant should have an Associates Degree
in Heating, Ventilating and Air
Conditioning Engineering or Mechanical
Engineering from a technical school or
equivalent experience
-Should be familiar with the following:
Constant and variable volume air systems,
Steam and chilled water and hot water
piping systems, Refrigeration piping and dx
equipment, Plumbing, fire protection and
process piping systems.
-Experience with piping systems handling
gases such as nitrous oxide, hydrogen,
ammonia, argon, helium, silane and oxygen
-Applicant must be familiar with the preparation of drawings via Auto-CAD
2002.
Other Requirements:
The applicant must be able to work
independently with a minimum of
supervision; must have the ability to
communicate and cooperate effectively with
clients, engineers, and skilled tradesmen;
Self-initiative is expected.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level:
|
Duration: 1 yr+
|
Pay Rate:
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC08/06/20999FACMCH
Precision Mechanical Inspector
CMM
|
Job Reference:
C-GJ-PMI
(Please use reference when applying for this job)
|
Location: Middlesex County
|
Our client has an immediate long-term need
a Precision Mechanical Inspector with
experience using CMM Machines.
RESPONSIBILITIES:
-Perform piece sampling and final
inspection on both manual and N/C machines
parts, castings, sheet metal components and
mechanical assemblies.
-Use of three axis coordinate measuring
instrument
-Planning of simple and complex inspection
procedures
EXPERIENCE:
-Experience with three axis coordinate
measuring instrument
-Ability to work from Blue Prints and
Sketches
-Experience working in Prototype Environment
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 4-5 years
|
Duration: 1yr+
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC07/21/03999PMI
SAP Plant Maintenance Assistant
SAP
|
Job Reference:
C-GJ-SAPA
(Please use reference when applying for this job)
|
Location: Lexington, MA
|
Our client has a long-term immediate need
for a SAP Plant Maintenance Assistant.
The SAP Plant Maintenance Assistant will
assist in identifying, gathering, creating
and entering associated bills of materials
and object data for various research
equipment in order to implement SAP and
meet Mission Assurance objective. This is
a long-term contract that will initially go
for one year. All work to be on-site at our
client in Lexington, MA.
RESPONSIBILITIES:
-Consult with and work closely with various
owners, researchers, supervisors and safety
personnel in order to assist with on-going
SAP documentation activities
-Help create preventative maintenance plans
to include tasks lists and schedules for
such plans for various equipment object
types. -Assist the Plant Maintenance Coordinator
by performing the following duties:
organizing equipment data sheets, revising
existing equipment data based on feedback,
make equipment labels using the Brady label
maker, assist in setting up project
packages, distribute work orders to the
various trades shops, generate weekly
reports using existing templates, work with
Equipment Control Group as required, spin
off real work orders, close out work orders
and any other duties that may be assigned.
EXPERIENCE/KNOWLEDGE REQUIRED:
-A technical degree in mechanical
engineering, associated discipline, or
equivalent combination of education and
facilities maintenance experience is highly
desirable.
-Minimum of two years experience in a
facilities services type environment
dealing with work orders and preventative
maintenance that involved complex
mechanical, electrical, Lab systems and
general plant equipment.
-Applicant should have extensive experience
with using automated methods
-Experience using Microsoft Windows
Applications and MS Outlook email is
required.
-Experience using a data base management
system preferably SAP Plant Maintenance and
Materials Management modules is highly
desirable.
-Ability to climb over and around equipment
in mechanical rooms and construction areas
a must.(This person will be required to
climb and maneuver on ladders, staging and
work platforms and/or tight spaces)
This contract opportunity is available
through Randolph Associates, Inc, a
staffing agency based locally in Cambridge,
MA. Since 1984, we have specialized in
recruiting information design and delivery
personnel in support of New England's
finest companies. Please submit your
resumes to jobs@greatjobs.com and
someone will respond to your inquiry
immediately.
We look forward to working with you!
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 2 years
|
Duration: 1 year+
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC07/09/20999SAPA
Mechanical Designer
ASME, CAD
|
Job Reference:
C-GJ-MEDES
(Please use reference when applying for this job)
|
Location: MA
|
Our client is looking for a
Mechanical Designer with at least ten
years of experience.
Responsibilities:
Design of waveguide runs, waveguide
interfaces and supports, and mechanical
design of jigs and fixtures.
Experience:
-Minimum six years experience using CAD
-Familiarity with waveguide, rotary
joints, and microwave components
-Familiarity with basic practices
in aircraft, missile, spacecraft, etc.
-Familiarity with ASME standards
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 10 years
|
Duration: 6+ Months
|
Pay Rate: competitive
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC06/10/06500MEDES
Mechanical Designer
|
Job Reference:
C-GJ-MECHDSN
(Please use reference when applying for this job)
|
Location: Lexington MA
|
We have ongoing senior-level contract openings with long-term potential at our client site in Lexington, MA for Optical-mechanical Designers with CAD experience to work on DOD projects in a high-levelENGineering environment.
These are design positions, notENGineering positions.
You must be eligible to obtain a DOD security clearance.
If you think you may have already applied to this position in the past, please send an updated resume or email your availability.
Call 617-441-8777 Ext. 6 for details about this outstanding job opportunity or e-mail your resume now!
|
Experience Level: 5+ Years
|
Duration: 6 - 9 Months
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
ENG-MEC05/06/30500MECHDSN
MECHANICAL DESIGNERS & ENGINEERS
|
Job Reference:
C-GJ-MDE999
(Please use reference when applying for this job)
|
Location: MA, NH, RI
|
We have ongoing needs for
Mechanical Designers & Engineers
with a minimum of
4-5
years of experience.
If you do not see an opportunity that fits your background, please contact us to discuss our other job openings and register for future needs.
Call 617-441-8777 Ext. 6 for details or
e-mail your resume now!
|
Experience Level: 4-5 Years
|
Duration: Varies
|
Pay Rate: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
Mechanical Designers & Engineers
|
Job Reference:
P-GJ-MDE999
(Please use reference when applying for this job)
|
Location: MA, NH, RI
|
Our clients frequently have openings for
Mechanical Designers & Engineers
with a minimum of
4-5
years of experience.
If you do not see an opportunity that fits your background, please contact us to discuss our other job openings and register for future needs.
Call 617-441-8777 Ext. 6 for details or
e-mail your resume now!
|
Experience Level: 4-5 Years
|
Salary: Open
|
Apply for this position | Top of Contract Listing | Top of Permanent Listing | Top of page
|
|
